爐子壽命長。由于高溫作用、機械磨損和腐蝕等因素的綜合作用，爐子不可避免會有損壞，必須定期對爐子進行檢修，應盡可能延長爐之的使用壽命，降低費用。

勞動條件好。要求爐子的機械化及自動化程度高，操作條件好，安全衛生，對環境無污染。

The furnace has a long life. Due to the combined action of high temperature, mechanical wear and corrosion, the furnace will inevitably be damaged. It is necessary to overhaul the furnace regularly, so as to prolong the service life of the furnace and reduce the cost of repair.  

The working conditi are good. It is required that the mechanization and automation of the furnace are high, the operating conditi are good, and the environment is safe and sanitary, and the environment is not polluted.

燃料氣的流動速度   燃料氣的流動速度與火焰的長短有密切關系，在外混式燃燒器中，燃料氣流速過大，會引起脫火；在半預混燃燒器中，燃料氣流速過小會引起回火。

There is a close relatihip between the flow velocity and flow velocity of flame fuel gas fuel gas in the length of the outer mixing burner, fuel gas flow rate is too large, will cause the removal of fire; in the semi premixed burner, fuel gas flow rate is too small will cause tempering.

連續加熱爐通常使用氣體燃料、重油或粉煤，有的燒塊煤。為了有效地利用廢氣熱量，在煙道內安裝預熱空氣和煤氣的換熱器，或安裝余熱鍋爐。

Continuous heating furnace usually use gas fuel, heavy oil or coal, and some coal burning. In order to effectively utilize exhaust heat, a preheat air and gas heat exchanger is installed in the flue, or a HRSG is installed.