一個切向鍵只能傳遞一個方向的轉矩，傳遞雙向轉矩時，須用互成120°～130°角的兩個鍵。用于載荷很大，對中要求不嚴的場合。由于鍵槽對軸削弱較大 ，常用于直徑大于100mm的軸上。

A tangent key can only transfer the torque of one direction. When the two-way torque is passed, the two keys of 120 to 130 degrees are required. An occasion for heavy load and no strict requirement. As the keyway is greatly weakened to the axis, it is often used on a shaft with a diameter larger than 100mm.

矩形花鍵聯接是應用為廣泛的花鍵聯接。 應用廣泛。如航空發動機、汽車、燃氣輪機、機床、工程機械、拖拉機、農業機械及一般機械傳動裝置等等。漸開線花鍵的齒廓為漸開線，分度圓壓力角α有30°及45°兩種。齒頂高分別為0.5m和0.4m(m為模數)。

The rectangular spline connection is the most widely used spline connection. It is widely used. Such as aero engine, automobile, gas turbine, machine tool, engineering machinery, tractor, agricultural machinery and general mechanical transmission equipment and so on. The tooth profile of the involute spline is involute, and the pressure angle of the dividing circle is 30 and 45 degrees. The top of the tooth is 0.5m and 0.4m respectively (M is the modulus).

裝夾過程及工作原理。鉗臺底座在設備工作臺上固定好后，先調整可調鉗口座在鉗體底座上的位置，確保裝夾行程內能有效對工件進行裝夾；再將待加工產品置于柔性虎鉗的兩個鉗口之間。

Clamping process and working principle. When the clamping platform is fixed on the equipment worktable, the  of the adjustable jaw seat on the base of the clamp body is adjusted first, so as to ensure that the workpiece can be clamped effectively in the clamping stroke, and then the processed product is placed between the two jaw openings of the flexible vice.