軋件通過冷床下的強制噴水霧化，提高了冷卻效果；通過開／關冷卻水管和采用水壓控制，冷卻速度能夠得到調節。

所有的軋件均被送到冷床上的固定位置，由移鋼機構將軋件從步進梁上翻出并移至冷床的輸出輥道上。

The water under the bed by forced atomization, the cooling effect is improved; through the opening or closing of cooling water pipe and the hydraulic pressure, the cooling speed can be adjusted.  

All of the workpiece were sent to a fixed on the cooling bed, a steel moving mechanism takes the output from the roller walking beam pulls out and moved to the bed on.

實現金屬軋制過程的設備。泛指完成軋材生產全過程的裝備，包括有主要設備、輔助設備、起重運輸設備和附屬設備等。但一般所說的軋機往往僅指主要設備。

A device for a metal rolling process. Generally refers to the equipment that completes the whole process of rolling material production, including main equipment, auxiliary equipment, lifting and transportation equipment and auxiliary equipment. Generally speaking, rolling mills usually refer to only the main equipments.

據說在14世紀歐洲就有軋機，但有記載的是1480年意大利人達·芬奇（Leonardo da Vinci）設計出軋機的草圖。1553年法國人布律列爾(Brulier)軋制出金和銀板材,用以制造錢幣。此后在西班牙、比利時和英國相繼出現軋機。

It is said that there are rolling mills in Europe in the fourteenth Century, but it is recorded that in 1480, Leonardo Da Vinci (Italian Italian designer Da Finch) designed the draft for rolling mills. In 1553 the French law Adler cloth (Brulier) rolled gold and silver plate, used in the manufacture of coins. Since then, rolling mills have been rolled out in Spain, Belgium and Britain.

輥式軋機生產率可以很高，有的可達到2000-4000 件/小時甚至更高，易于實現自動化生產。總之，輥式軋機適用于對產品精度要求不高，且同時軋制一個或幾個零件的情況。輥式軋機是三種類型中運用多的一種。此外，熱軋時可以發揮出較高的金屬塑性，而且所產生的變形抗力較小，能夠有效的防止金屬出現嚴重的變形問題。圓弧式軋機適用于大批量的為以后鍛造供坯的生產情況。

The productivity of the roller mill can be very high, some can reach 2000-4000 pieces / hour or even higher, and it is easy to realize automatic production. In conclusion, the roll mill is suitable for the low accuracy of products and rolling one or several parts at the same time. Roll mill is the most widely used in three types. The circular arc mill is suitable for large quantities of production for forging later.