(1)軟輥；肖氏硬度約為30一40，用于開坯機、大型型鋼軋機的租軋機等。

(2)半硬輥：肖氏硬度約為40一60，用于大型、中型、小型型鋼軋機和鋼板輪機的租軋機。

(3)硬面輥：肖氏硬度約為60一85，用于薄板、中板、中型型鋼和小型型鋼軋機的稿軋機及四輥軋機的支撐輥。

(4)特硬輥le氏硬度約為85—100，用于冷軋機。

(1) soft roll; the hardness of Shaw is about 30 40. It is used for the renting rolling mill of the billet machine and the large steel mill.

(2) semi hard roll: the hardness of the Shaw is about 40 to 60. It is used for the renting rolling mill of large, medium, small type steel mill and steel plate turbine.

(3) hard roll: Shore hardness of about 60 to 85, for supporting roller mill release sheet, plate, medium and small steel mill and four roller mill.

(4) the hardness of the hard roll Le is about 85 - 100 for cold rolling mill.

軋輥是軋機的核心部件，軋輥的使用涉及軋機使用時的類型選擇、軋輥的準備、在軋制過程中的維修和周期性修整，而這些都全是影響軋機生產率、產品質量和生產經濟性的因素。

Roll is the core part of the rolling mill. The use of the roll involves the type selection of the rolling mill, the preparation of the roll, the maintenance and the periodic dressing during the rolling process, all of which are all factors that affect the productivity of the rolling mill, the quality of the product and the production economy.

在粗軋機架后，中型型材軋機有兩組連續的機架。連續軋機，根據孔型設計既可以水平布置，也可以立式布置。對于有平行緣的型鋼和槽鋼，還配有機架。

After the roughing mill, there are two sets of continuous rack in the medium section mill. The continuous rolling mill can be arranged horizontally or vertically according to the pass design. For steel and channel steel with parallel edges, universal frame is also available.