鋼的軋制，是整個軋鋼生產過程的核心。坯料通過軋制完成變形過程。軋制工序?qū)Ξa(chǎn)品質量起著決定性作用。軋制產品的質量要求，包括產品的幾何形狀和尺寸內部組織和性能以及產品光潔度三個方面。

The rolling of steel is the core of the whole rolling process. The blanks are rolled to complete the deformation process. The rolling process plays a decisive role in the quality of the product. The quality requirements of rolling products include three aspects, including the internal structure and performance of the geometric and dimensional accuracy of the products and the finish of the products.

軋鋼原料：

目前主要為連鑄坯，另外還有鋼錠，段軋鋼等，正確的選擇坯料的種類，斷面形狀和尺寸大小以及重量對軋鋼生產具有重要意義。

Rolling material:

At present, mainly for continuous casting billets, as well as steel ingots, section rolling, etc., correctly choose the type of billet, section shape and size and weight are important for steel rolling production.

軋輥的彈性壓扁沿輥身長度散布是不勻稱的，若邊部延伸率大。軋機支持輥的外貌肖氏硬度1樣平常為HS45左右，在另1側設專人觀察，也會出現相反的環境，薄鋼板通常以卷板和剪切成肯定長度和寬度的單張板投放市場。

The elastic flattening of the roll is uneven along the length of the roller body, and the elongation at the side is large. The appearance of the rolling mill support roll is about 1 HS45, which is normally observed on the other 1 sides, and the  environment will occur. Thin plates are usually put on the market with rolled plates and a single sheet that is cut to a certain length and width.

橫軋成型的特點是：1.兩個工作軋輥軸線平行，其轉動方向相同； 2.軋件軸線與軋輥軸線平行，軋件作轉動，其轉動方向與軋輥相反，進出料需專門裝置。

The characteristics of the cross rolling are as follows: 1. the axis of the two working rolls is parallel and its rotation direction is the same; the axis of the 2. piece is parallel to the axis of the roll, and the rolling piece is rotated. The direction of the roll is to the roll, and the special device for entering and leaving the material is needed.