輥系快速整體更換不需吊車，采甩軋輥牽引小車和橫移臺車結合的換輥方式，導衛橫梁安裝在軋機軸承座上，更換軋輥時,導衛及橫梁隨輥系整套從牌坊窗口中拖出，一次換輥時間僅為20min.

You don't need to replace the whole fast roller roller way for mining crane, trolley and swing roller traversing trolley with the guide beam is installed on the bearing seat of rolling mill, roll changing, guide and beam with roll set pulled from the housing window, a roll change time is only 20min.

軋件通過冷床下的強制噴水霧化，提高了冷卻效果；通過開／關冷卻水管和采用水壓控制，冷卻速度能夠得到調節。

所有的軋件均被送到冷床上的固定位置，由移鋼機構將軋件從步進梁上翻出并移至冷床的輸出輥道上。

The water under the bed by forced atomization, the cooling effect is improved; through the opening or closing of cooling water pipe and the hydraulic pressure, the cooling speed can be adjusted.  

All of the workpiece were sent to a fixed on the cooling bed, a steel moving mechanism takes the output from the roller walking beam pulls out and moved to the bed on.

半閉口式機架是機架與機架蓋之間采用斜楔連接的一種機架。這種機架兼有開口式機架和閉口式機架的優點，裝卸、換輥方便，制造容易，并有較高的剛度，故一般大中型的型鋼軋機都采用這種形式的機架。

A semi closed frame is a frame with a wedge between the frame and the frame cover. The rack has the advantages of open frame and closed frame. It has the advantages of loading and unloading, easy roll changing, easy manufacture and high rigidity. Therefore, a large and medium-sized steel mill is adopted in this form.

據說在14世紀歐洲就有軋機，但有記載的是1480年意大利人達·芬奇（Leonardo da Vinci）設計出軋機的草圖。1553年法國人布律列爾(Brulier)軋制出金和銀板材,用以制造錢幣。此后在西班牙、比利時和英國相繼出現軋機。

It is said that there are rolling mills in Europe in the fourteenth Century, but it is recorded that in 1480, Leonardo Da Vinci (Italian Italian designer Da Finch) designed the draft for rolling mills. In 1553 the French law Adler cloth (Brulier) rolled gold and silver plate, used in the manufacture of coins. Since then, rolling mills have been rolled out in Spain, Belgium and Britain.