PPR水管連接?

PPR水管連接的方式主要采用的是熱熔。在進行熱熔連接前，要將管道的的兩端上的塵土及污漬清除掉。在用熔接機加熱管材的及管材的配件，當管材的極其的管件的熱熔深度及時間達到一定的要求后，可進行管材的熱熔焊接。?

PPR water pipe connection

The main connection mode of PPR water pipe is hot melting. Before the hot-melt connection， the dust and stains on both ends of the pipe should be removed. When the welding machine is used to heat pipes and pipe fittings， when the hot-melt profundity and time of pipes and pipe fittings meet certain requirements， the hot-melt welding of pipes can be carried out.

 一些廠家由于熔焊器放不正，熔焊時管端加熱就不正，連接易發生歪斜，以后在長時間的運行時，PVC排水管代理，由于熱應力作用而出現泄漏。

Uk Gafloon Pipe Group Ltd，銷售PPR管、PVC管道等產品，PVC排水管廠家，詳情歡迎來電咨詢訪問。

Due to the improper placement of the welding device in some manufacturers，PVC排水管咨詢， the heating of the pipe end is not correct during the welding， and the connection is prone to skew. In the long-term operation， the leakage occurs due to the effect of thermal stress.

Uk Gafloon Pipe Group Ltd sells PPR pipes， PVC pipes and other products. For details， please call us.

同種規格的PPR熱水管壁厚要比冷水管的厚，簡單舉例：D25×2.3 D25×2.8 D25×3.5 D25×4.2 這里列舉的是外徑為25MM的PPR管所對應的四種不同規格，前面兩種為冷水管，后面兩種為熱水管，麗水PVC排水管，因此可以非常明顯的看出，冷水管的壁厚要小于熱水管。

The wall thickness of PPR hot water pipe of the same specification is thicker than that of cold water pipe. Simple example: D25 × 2.3 D25 × 2.8 D25 × 3.5 D25 × 4.2 here are four different norms of PPR pipe with outer diameter of 25 mm. The first two are cold water pipes and the latter two are hot water pipes. Therefore， it is very clear that the wall thickness of cold water pipe is smaller than that of hot water pipe.

PVC排水管咨詢-Gafloon卡弗龍-麗水PVC排水管由臺州艾菲力塑膠有限公司提供。臺州艾菲力塑膠有限公司是一家從事“塑料制品（不含塑料桶）,橡膠制品（不含橡膠桶）,閥門”的公司。自成立以來，我們堅持以“誠信為本，穩健經營”的方針，勇于參與市場的良性競爭，使“Gafloon卡弗龍”品牌擁有良好口碑。我們堅持“服務至上，用戶至上”的原則，使艾菲力塑膠在塑料管中贏得了客戶的信任，樹立了良好的企業形象。 特別說明：本信息的圖片和資料僅供參考，歡迎聯系我們索取準確的資料，謝謝！同時本公司還是從事PPR管，地暖管，PVC管的廠家，歡迎來電咨詢。