在帶鋼熱連軋機上使用著許多輥道，它們被分成若干段，每一段輥道或者以獨立的或者以與軋輥同步的速度和方向運送軋件。

為使軋件能夠在輥道中心運行，采用鼓形輥，并且交替地使左右兩邊的水平面稍微傾斜，或者使輥子的軸線與軋件運行方向的交角交替地比直角稍微偏斜一些。

Many roller tables are used on hot strip mills. They are divided into several segments, each section of rollers or parts transported independently or at the same speed and direction with the rollers.

In order to make the workpiece can be run in the center of the drum shaped roller, roller, and alternately on both sides of the horizontal plane or slightly tilted, the roller axis and the running direction of the rolling angle alternately than some slightly skewed angle.

中間輥道位于拉矯機和切割設備之間，用于支承和輸送鑄坯和輸送引錠桿。拉坯時，中間輥道與拉速同步，送引錠桿時可以用較高的速度。切割區輥道為切割區四周的輥道，該輥道中有幾個輥子需要升降或擺動，以防止切割時切壞輥子和切割渣粘結輥面。

The middle roller is located between the pull straightening machine and the cutting equipment, which is used to support and transport billets and to transport ingot bars. The middle roller, and casting speed synchronization, you can use a higher speed to send dummy bar.

The roller section of the cutting area is the roller table around the cutting area, and there are several rollers that need to rise or swing in the roller way, so as to prevent the roller and the cutting slag from sticking to the roller surface when cutting.

輥子一般采用無縫鋼管制成，也有用鑄鐵管或其他材料制造的，輥子軸固定在支架中。輥子與軸之閥裝有滾動軸零。鑄造車間常用的輥子有三種：輕型（Φ73）、中型（Φ105）和重型（Φ155）。其中前兩種用的較多。

The roller is usually made of seamless steel tube, also made of cast iron pipe or other material, and the roller shaft is fixed in the bracket. The rollers and shaft valves are equipped with rolling axis zero. There are three kinds of rolls used in the foundry workshop: light (73), medium (105) and heavy (155). The first two are more used.

皮帶輸送機生產廠家在進行設計帶式輸送機時，優先采用長距離、大運量輸送機。皮帶輸送機從經濟上節省占地等方面進行考慮一般不設置輸送線并行的輸送方式在特別重要的環節當中也有采用并行兩條輸送，其中一條備用，用都是采用多條輸送機進行串聯。

Belt conveyor manufacturers in the design of belt conveyor, the priority is to use long distance, large capacity conveyor. Belt conveyor from the economy to save an area of land and other aspects of the belt conveyer in general does not set the transmission line parallel transport mode in the particular important link also has two parallel transmission, one of the spare, use a multi conveyor in series.